Energy saving tips to help home based business owners save money on home heating costs You probably aren’t planning a party to recognize this particular celebration I’m about to mention, but it’s worth taking notice of the purpose. Each year, the U.S. Department of Energy (DOE) dedicates October as Energy Awareness Month. Yeah, it’s a surprise to most of us. But the official mission of the DOE is an important one — to educate consumers on the critical impact energy use has on our lives, our community and our country. As home-based business owners know, keeping your home running smoothly translates into a business that can run smoothly as well. So what’s good for the home is good for your bottom line. When it comes to wasting energy, one of the biggest culprits is poor insulation. In fact, a study conducted by Harvard University showed that more than 45 million U.S. homes are under-insulated. Coupled with an anticipated 17 percent increase in the costs of natural gas — the primary heating source used in 58 percent of U.S. homes — there is no better time for homeowners to evaluate the energy efficiency of their homes. Here are a few tips to get started, thanks to experts with CertainTeed Corporation: Conduct a home energy audit. With a simple but careful walk-through, many problems can be spotted in any type of house. Locate obvious air leaks by examining gaps along the baseboard or edge of the flooring, at junctures of the walls and ceilings, and at electrical box openings and plumbing penetrations. If cracks are present, caulk and weatherstrip. Attic insulation is key when evaluating the energy efficiency of a home. If the attic has 6 inches or less of insulation, it should be upgraded to the recommended level of insulation for that geographic area. Visit certainteed.com or talk with a local insulation contractor to learn the appropriate level. Check moisture management. Some insulating systems can provide the added benefit of moisture management in addition to traditional insulation performance. Specific products offer excellent thermal protection while reducing in-the-wall moisture to help prevent the growth of damaging mold and mildew. Check air flow. Air enters the living space from unheated parts of the house, such as attics, basements or crawl spaces. Any ducts that pass through an unheated space should be sealed and insulated, to prevent air and heat loss. Insulation works best when air is not moving through or around it. Seal air leaks to ensure that insulation is providing its full performance. Contact experienced Staten Island appliance repair technicians to come and check your air flow and with a free evaluation determine if your AC needs to be repaired or replaced. They can assist with fixing the air flow issue if needed. Check the R-value of fiber glass insulation before buying it. Plainly, R-value means resistance to heat flow. The greater the R-value, the greater the insulation power.
In a world where we have HVAC equipment everywhere, it is inevitable that at some stage you are going to need to get HVAC repair done.
Due to both the location of the HVAC (heating ventilation and air conditioning equipment) installations in you home or business you are often unable to do repair work yourself. Add to this the increase in technical sophistication of these systems, you are most unlikely to want to do any kind of DIY repair in any case. So this is where a professional comes in, specialized in the area of air conditioning repair you are reliant upon them.
Choosing A Reputable Company in New York
So how do you ensure your experience is a good one? There are a few things you can do to make the process as smooth as possible.
Firstly check that the HVAC appliance repair in Brooklyn you choose is a member of an accredited industry body. This accreditation should indicate they have the necessary skills to undertake your work. They should also have their own certification to show they are qualified in the business of air con repairs. Being a member of an industry body is also another point of recourse if there is a dispute that can not be resolved to your mutual satisfaction.
Check out any references written or verbal, that the firm may give you for previous repair work they may have done in the past. However be aware they are only likely to refer you to clients they believe will give them a good reference.
A more independent source of opinion on this specialist work may be a local internet review site. This is where clients leave ratings of their experiences. These reviews are from generally anonymous people so do not believe everything you read. Fantastic reviews may have been written by the person doing the HVAC repair themselves while negative reviews may have been posted by rival firms. Instead with these sort if reviews, look for the general trend that will indicate if the work of the firm tends to be good.
Another way to get a feel for whether the contractor you are looking at is up for the job is to look at their professional equipment and general appearance. If the office, van, emails all look like they are providing a professional image, there is a good chance that their work will be of a similar standard. If their equipment looks in good condition and is well maintained this is another indicator. The equipment does not have to be brand new but it should be appropriately modern and well looked after.
Make sure you have a contract before work begins. You do not want misunderstandings to occur once the work has been started. As well as having all the specifics of the contract make sure there is a dispute resolution clause that will set out what to do if anything should end up in disagreement.
It is a fact of life that if you have HVAC equipment is going to need maintenance and perhaps some major repair at some stage. HVAC repair does not have to be a painful process.
The author loves to inform readers about the latest in Staten Island appliance repair service. Appliances are an integral part of our daily lives so it only makes sense to invest money and time into a service that we often take for granted but is necessary for our comfort. If you live in the New York area, there are many companies that offer HVAC repair in Brooklyn. I recommend and suggest various tips to assist you in choosing the best company for you and the area that you’re in.
There are a number of appliance repairs that are too difficult for you to do on your own unless you have a lot of professional training and experience in the field. For example, the motor that turns the plate on a microwave may go bad. It could be very difficult to replace the motor on your own if you have never worked on a microwave before. However, there are also a lot of simple repairs that you can make yourself, things that you can do by yourself so that you do not have to hire someone else to do them for you.
For example, you can replace the door on a kitchen stove. All stoves are slightly different, but most of the doors just attach with hinges on the bottom edge. These hinges allow the door to open downward so that the trays can come out. When the door falls off, the stove will not work at all. This is not as difficult as some other appliance repairs, though, because you really just need to run screws through the hinges and into the new door. You can do this in a few minutes with a hand screw driver or a power screw driver.
As far as Staten Island appliance repair is concerned, another thing that you can do on your own is a job replacing the water heater elements. A water heater is very crucial to the functionality of a number of other appliances. When the elements go bad, either rusting or breaking in half, the water will not longer get hot. Fortunately, you just have to open up the back panel, unscrew the old elements, and screw the new ones in place. You will need a wrench for this job since the elements are usually quite firm in their housings.
Appliance repairs do not always have to be long and exhausting jobs. If a light breaks in your refrigerator, it is possible to replace it on your own. There will typically be a small grate over the light that is designed to protect it. You will need to remove this by using a screwdriver. Keep all of the screws in one place so that you can find them later. Take the light out and bring it with you to the hardware store to make sure that you buy an identical replacement. When you come back, you just have to screw the new light into place and then put the grate back over it. Just be sure not to hit the light with the grate or you could break the new bulb as well.
There are many types of appliance repairs that you will not be able to do on your own, but the ones above are not very difficult even if you have not fixed anything before in your life. You do not have to call a professional right away. You will end up saving money if you do things on your own, and you will also have a good sense of accomplishment.
The author is interested in informing readers about professional appliance repair services. Appliance repair is a field that requires expertise in order to effectively fix the mechanics of broken appliances. In order to maintain a proper living situation, its in the best interest to find expert service especially in areas that are hit hard by seasonal weather. Heating repair in Brooklyn and HVAC repairs in Brooklyn are often the most important appliances to take care of to prevent things as extreme as life threatening illness.
Are you looking for AC repair in Brooklyn or the surrounding area? The warm season is still here. Let us provide you with recommendations for quality, professional service at a very reasonable price. Our recommended skilled technicians are highly experienced and can handle virtually any AC repair issue.
We have heard of many satisfied customers who rave about how quickly our friends were able to fix their cooling system problems. Give them a call and let their courteous and professional staff show you why they are the best air conditioning company in the area.
Are You Experiencing A Frozen AC in Brooklyn?
The hot weather drives people indoors looking for anything frozen to cool them down. Ice is your friend when the climate overheats. Does it seem odd that although your air conditioner has iced up it is incapable of cooling your home? The problem with a frozen air conditioner (AC) is that ice gets in the way of air circulation. The interference of airflow is likely what caused the problem in the first place. Once the system is frozen, the problem gets worse. Bear Appliance Repair technicians have experience with frozen AC repair in Brooklyn during the warmer months of the year.
How Does an AC System Work?
The AC system works by circulating refrigerant between the outdoor condenser and the indoor evaporator. It starts out as liquid; when it reaches the evaporator, inside the home, it enters a very small hole which causes it to evaporate into its gas form. While inside the evaporator, the fan blows warm air through it. The air cools as it passes into the ducts on the way to the rest of the house. When anything blocks airflow, the evaporator is in danger of freezing. A frozen evaporator can only thaw after the system is switched to the “off” position. Call us immediately and power down the unit.
Our recommended technician starts by looking for a dirty or missing filter. If the filter has an extreme amount of debris, the repair person changes it and checks the performance. If the filter is missing, the evaporator needs an inspection.
In the case of low airflow that originates from the filter or a clogged evaporator, the homeowner notices that the AC is not cooling properly before the freeze up. The technician needs to know everything. They became famous for AC repair in Brooklyn by listening to customers; please tell us what you know.
How Does a Bad Fan Cause an Airflow Issue?
Another airflow issue capable of causing a freeze up is a bad fan. The problem can go unnoticed for a few days if the fan runs intermittently. The bearings sometimes go bad. The condition causes a strain on the motor which then overheats. Overheating causes the motor to lockup. The outdoor condenser continues to send refrigerant into the evaporator. There is a lack of airflow because the fan motor is too hot to run. The motor may start turning again after it cools down. Homeowners hear the fan blowing, but the house is uncomfortable. The cycle repeats until the evaporator finally freezes. Our technician repairs or replaces the motor and the problem is solved.
If none of these issues is present, we check the ducts. Sometimes children drop toys inside. This impedes airflow. A utility vacuum is the tool of choice for removing hard-to-reach toys from the ducts.
When you experience a frozen AC, call Bear Appliance Repair. When it comes to AC repair in Brooklyn, they have the knowledge you need. Let them cool you down, so you can get on with the good life you deserve.
Call Them Today at: (718) 809-6962
They Serve Appliance Repair in the Following Boroughs of New York:
Brooklyn, Queens, Manhattan and Staten Island